iPixel LED Light Co.,Ltd
Make the world colorful
Full Color LED Strip
WS2812B/SK6812 30LEDs/m LED Strip

Application:

1. Hotels,restaurants,nights clubs,

2. Shopping malls,various shops,

3. Coffee/wine bars, furniture light

4. Cinemas,beauty centers,
5. Coffee/wine bars, furniture light.

Email: inquiry@ipixelleds.com

Share to

WS2812B/SK6812 30LEDs/m LED Strip

Product Parameter:

P/N Beam angle
VCC Power/M
LED Qty/m Size(mm)
IC chip
PCB Color Lumen per meter
IP Rate
S302812B 120 deg
DC5V 7.2W(MAX)
5050 30leds/m 5000*10 WS2812B/SK6812 White& Black R:12000 G:21000B:5700
IP20/IP65

1


Features:

1.Usually the actual current for colorful design is about 1/3 to 1/2 the max current,
2.To make the strip thin and easier to manufacture, the controller chip is inside the LED,
3.The chip only uses a single pin for input and a single pin for output. The protocol used isvery timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision,,
4.The way the pixels are controlled by an Arduino, the entire strip must be buffered in memory
5.There are 30 RGB LEDs per meter, and you can control each LED individually! 
6.This is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue,
7.The strip is made of flexible PCB material,  You can cut this stuff pretty easily with wire cutters,
8.There are cut-lines every 1.3"/3.4cm (1 LED each). Solder to the 0.1" copper pads,
9.They come in 5 meter reels with a 3-pin JST SM connector on each end and separated power/ground wires.

1


Connection:


Last: WS2812B/SK6812 60LEDs/m LED Strip
Next: WS2812B LED Strip-4mm Width
Email: inquiry@ipixelleds.com WhatsApp: 0086-138-0255-3087       Skype: ipixelledCopyright © 2016 iPixel LED Light Co.,Ltd     版权所有:深圳市像素之光科技有限公司 粤ICP备16048450号
Online service