iPixel LED Light Co.,Ltd
Make the world colorful
LED Controller
K-1000C
Application:


1. Full color LED dmx tube.
2. LED pixel light,RGBW LED Light.
3. RGBW LED strip,led light bar.

4.Outdoor Lighting Engineering.

Email: inquiry@ipixelleds.com


Share to

K-1000C m system  features:
1、32 to 65536 degree Gray control, Gamma correction procession handle.
2、Support various point, line light source, and all kinds of rules and specific shaped handle.
3. The controller has one output port, can support up to 512/2048 pixels(DMX lighting support up to 512 pixels).
4、Play content stored in the SD card , the SD card can store up to 32 effects File, SD card capacity support 128MB-32GB.
5、The controller can single set use,also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5M² pure copper power cord.
6、The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and
convenient.
7、For the DMX lighting IC, the controller comes with write address function; In addition, with use of our 2016 LedEdit-K V3.26 or later edition can make one key write address function setting.
8、Support load lamp is 4 channels (RGBW) pixels, or split into single channel point pixels.
9、Enhanced 485 TTL and 485 differential (DMX) signal output.
10、The controller comes with the test effects were as follows: 1 red, green, blue and black jump; 2 red, green, blue and black gradient; 3 red, green, blue and goes.

NOTES: 
1.If support RGBW four  channels’lights should select  K-1000-RGBW.
2.If support single  channel t light should choose  K-1000-W, at this time, one channel means  one pixe ,the software effect make as white lighting.

Button  meaning:

 Button

Meaning 

 CHIP  Switch chip

Press CHIP and then MODE button, can enter write code mode,61 means UCS512-A/B coding;

62 means WS2821 coding; 63 means SM512 coding, 64 means UCS512-C coding

 MODE  Switch file
 SPEED+  Speed up  Press SPEED+ and SPEED- the same time, would enter effect files looping mode.
 SPEED-  Speed down

Specific  parameter:

Memory

Physical  parameter

 Memory  card type  SD card Working temperature -30℃—85℃
 SD card capacity 128MB—32GB Working power DC 5V -24V input
 SD card format  FAT or FAT32 Power consumption 2W
 Storage file   *.led Data transmission interface 3pin binding post
 SD CARD  SD card slot Weight  0.35Kg

Conventional IC lamps wiring

Size:L 159* W 89* H 24 mm

Last: K-8000C
Next: SP105E Magic Controller
Email: inquiry@ipixelleds.com WhatsApp: 0086-138-0255-3087       Skype: ipixelledCopyright © 2016 iPixel LED Light Co.,Ltd     版权所有:深圳市像素之光科技有限公司 粤ICP备16048450号
Online service