| Addressable LED Metero Tube—— Single Side |
| Date：2023-10-25 10:33:21 Click：252 |
A new meteor tube project, an old customer from UK. This tube with 1360mm long, 15mm tube diameter,84pcs addressable SK6812 LEDs,and single side PCB.The both end don't need cap to seal the tube and signal direction is from top to end, then to top,but our customer asked only weld a 4pin connector(Din, Dout, GND,DC5V+) on the top side,that means the front side solder 3 wires(Din GND,DC5V+), and back side solder a Dout cable. In order to avoid voltage drop, we will weld a 2pin cable (GND and dc5v+) from back top to middle to end for each tube.
|
Previous：Seamless Joint LED Rigid Bar Next： Auto LED Snowfall Tube |
Email: inquiry@ipixelleds.com
WhatsApp: 0086-138-0255-3087
Skype: ipixelled
Copyright © 2016 iPixel LED Light Co.,Ltd
版权所有：深圳市像素之光科技有限公司
备案号：粤ICP备16048450号
粤公网安备 44030602006908号
